YGDP Flash tool allows you to flash CPB( firmwares ) on your Android Smartphones. Follow these steps carefully don’t skip any step otherwise you may brick your device.
Requirement : Your Android Device with at least 40-70% charge, a good quality USB Cable and a windows 7,8,8.1,10 based PC with compatible YGDP Flash Tool installed in it, Stock ROM flash file (cpb file), Required USB Drivers.
Step 1: Download and install the required USB Drivers for your device model on your Computer. If Drivers are already installed, then Skip this Step.
Step 2: Download and install YGDP Flash Tool latest version on your Computer. click the below button to download latest version.
Step 3: Open YGDP Flashing tool
Step 4: : Once YGDP Flashing Tool is launched, you will be able to see the following screen:
Step 5: Now, enter the password as 369 and 9527 and click on login button
Step 6: Once you are able to see the main screen of YGDP Tool, then click on the config button
Step 7: And add the CPB firmware (locate the CPB firmware that you want to flash on your android device):
Step 8: Now, click on apply button.
Step 9: Now, connect your android device to the computer (make sure it is power off and battery installed).
Step 10: Now click on the Button to begin the flashing.
Step 11: : Once Flashing is completed you will be able to see green upgrade successful message.
Congratulations, Now your Android Device is successfully flashed with the Stock Rom you have Downloaded.